Finite Difference Schemes for the Determination of Thermal Coefficient and Analysis of its Variation with Time

Authors

  • M. Usman
  • M.O. Ahmed
  • Sumera. K
  • Mumtaz. A
  • M. Rafiq

Abstract

In this paper, numerical solution of thermal conduction problem has been analyzed. Three Finitedifference schemes have been derived for the determination of thermal coefficient and for temperaturedistribution at different time levels. Moreover, by using derived schemes a test problem has beensolved and computed results have been compared with exact solutions for different time level, itreveals accuracy of these schemes as well as the physical behavior of the test problem. The generalpattern which has been observed is that with passage of time temperature distribution increases.

References

Montgomery, D.C.,“ Design and Analysis of Experiments”, 3rd Edition. John Wiley & Sons, New York, (1991) pp. 270–569.

Ahmad, A., Ahmad, M.I., Khan, I.A., Khan, H., “Oil Field Filtration: Optimising cartridge filtration of oilfield brine” Filtration & Separation 49 (2012) pp. 36-42.

Rocak, D., Kosec, M., Degen, A.,“Ceramic suspension optimization using factorial design of experiments” JEUR CERAM SOC, 22 (2002) pp. 391–395.

Chen,B., Peng-Fei,L.,Min-Qian, L., Run-Chu, Z.,“Some results on blocked regular 2-level fractional factorial designs with clear effects”JSTATPLANINFER,136 (2006) pp. 4436– 4449.

Zhang,R.,Park,D.,“Optimal blocking of twolevel fractional factorial designs” J STATPLANINFER,91 (2000) pp. 107-121.

Berkum, E.E.M., Habers, E.J., Ven, P.M., Wijnen, J.Th. M.,“Fractional factorial designs for two-step production processes” JSTATPLANINFER, 132 (2005), pp.53 – 62.

Zinatizadeh, A.A.L., Mohamed, A.R.,Abdullah, A.Z., Mashitah, M.D.,Isa, M.H., Najaf pour, G.D., “Process modeling and analysis of palm oil mill effluent treatment in an up-flow anaerobic sludge fixed film bioreactor using response surface methodology (RSM)”, Water Research, 40 (2006) pp. 3193-3208.

Bidin, H.,Basri, M., Radzi, S.M., Ariff, A., Abdul, A., Rahman, R.Z.N.R., Salleh, “Optimization of lipase-catalyzed synthesis of palm amino acid surfactant using response surface methodology (RSM)”IND CROP PROD, 30 (2009) pp. 206–211.

Mu,Y., Zheng, X., Yu,H.,“Determining optimum conditions for hydrogen production from glucose by an anaerobic culture using response surface methodology (RSM)”INT JHYDROGEN ENERG, 34 (2009) pp. 7959–7963.

Ferella, F., Celso, G.M.D., Michelis, I.D., Stanisci, V., Vegliò, F., “Optimization of the transesterification reaction in bio-diesel production” Fuel, 89 (2010 ) pp. 36–42.

Shekarchizadeh, H., Kadivar, M., Ghaziaskar, H.S., Rezayat, M.,“Optimization of enzymatic synthesis of cocoabutter analog from camel hump fat in supercritical carbon dioxide by response surface method (RSM)” JSUPERCRITFLUID,49 (2009) pp. 209–215.

Cheison, S.C., Wang, Z., Xu, S.,“Use of response surface methodology to optimise the hydrolysis of whey protein isolatein a tangential flow filter membrane reactor” J FOOD ENG,80 (2007) pp. 1134–1145.

Bezerra, M.A., Ricardo, E.S., Eliane, P.O., Leonardo, S.V., Luciane, A.E., “Response surface methodology (RSM) as a tool for optimization in analytical chemistry” TALANTA,76 (2008) pp. 965–977.

Chen,S.,Lin,P.,“Optimization of operating parameters for the metal bioleaching process of contaminated soil” SEP PURIFTECHNOL, 71 (2010) pp. 178–185.

Tsujikawa, H., Hauai, I.,“The reaction rate of alkaline hydrolysis of ethyl acetate” BCHEM SOC JPN,39 (1966) pp. 1837-1842.

Cotte, M., Checroun, E., Susini, J., Dumas, P., Tchoreloff, P., Besnard, M., Walter, P., “Kinetics of oil saponification by lead salts in ancient preparations of pharmaceutical lead plasters and painting lead mediums” TALANTA, 70 (2006) pp. 1136–1142.

Battimelli, A., Hélène, C., Jean-Philippe, D.,“Saponification of fatty slaughter-house wastes for enhancing anaerobic biodegradability” BIORESOURCE TECHNOL,100 (2009) pp. 3695–3700.

Bursali, N., Ertunc, S., Akay,B.,“Process improvement approach to saponification reaction using statistical experimental design” CHEM ENG PROCESS, 45 (2006), pp.980-989.

Ahmad, A., Ahmad, M.I., Younas, M., Khan, H., Shah, M.H., “A comparative study of alkaline hydrolysis of ethyl acetate using design of experiments” IJCCE, 32 (2013) In press.

Downloads

Published

2016-06-22

Issue

Section

Polymer Engineering and Chemical Engineering, Materials Engineering, Physics, Chemistry, Mathematics