Damage localization in plate-type structure using 2D-Bayesian technique

Authors

  • Vishal Sindhu University of Engineering & Technology, Lahore
  • Ummul Baneen University of Engineering & Technology, Lahore
  • Syed Abbas Zilqurnain Naqvi University of Engineering & Technology, Lahore
  • Ayisha Nayyar University of Engineering & Technology, Lahore

Abstract

Failure in civil, mechanical, and aerospace structures are commonly due to heavy loads, environmental hazards and not to mention their lifespan. Structural health monitoring (SHM) has become vital to maintain the design and strength of these structures. For detection of damage, prior data of the structure is crucial but in the absence of the prior data, for example in case of antiquated structures, this becomes quite challenging. Gapped smoothing method (GSM) has been used successfully to detect damage with the response data only. However, noise in the measurement data is detrimental to its effectiveness. Moreover, single damage has been identified with most of the techniques particularly in plate-type structures, but those methods are not as successful in case of multiple damage. In this paper, a 2D-Bayesian technique is presented to suppress noise along with 2D-GSM to detect multiple damage in plate-type structures without using any prior data. The technique uses the fusion approach to combine the information from the available mode shape data by reducing the noise and highlighting the damage locations. Different damage scenarios in plate-type structures are simulated in ANSYS. To evaluate the effectiveness of the proposed method, the simulated data is contaminated with noise and results are compared with the published work.

Author Biographies

Ummul Baneen, University of Engineering & Technology, Lahore

Department of Mechatronics & Control Engineering

Assistant Professor

Syed Abbas Zilqurnain Naqvi, University of Engineering & Technology, Lahore

Department of Mechatronics & Control Engineering

Assistant Professor

Ayisha Nayyar, University of Engineering & Technology, Lahore

Department of Mechatronics & Control Engineering

Assistant Professor

References

Bingyang Zhao, Yongwang Zhao, Dianfu Ma” A Constraint Mechanism for Dynamic Evolution of Service Oriented Systems” [2012]

Grace A. Lewis, Dennis B. “Service-Oriented Architecture and its Implications for Software Maintenance and Evolution” Smith [2008]

W. T. Tsai, Service-Oriented System Engineering: A New Paradigm. Proceedings of the IEEE International Workshop on Service-Oriented System Engineering (SOSE), pp3-6, Beijing, China, [2005].

N. Medvidovic and R. N. Taylor, “A classification and comparison framework for software architecture description languages,” IEEE Trans, Softw. Eng., 26(1):70–93, 2000

“A Framework for Roles for Development, Evolution and Maintenance of SOA-Based ,Systems” Mira Kajko-Mattsson Grace A. Lewis, Dennis B. Smith [2007]

Haines, M. N. The Impact of Service-Oriented Application Development on Software Development Methodology. Proceedings of the 40th Annual Hawaii International Conference on System Sciences, IEEE 2007, pp. 172b-172b.

Lee S.P., Chan L.P., Lee E.W. “Web Services Implementation Methodology for SOA Application”.

Alan Brown IBM Rational Software” Practical Approaches to Delivering Service-Oriented Solutions: The Role of Software Architects and Architecture in an SOA World” IEEE (2008)

E. Gamma, R. Helm, R. Johns on, J. Vlissides,” Design Patterns: Elements of Reusable Object-Oriented Software”, Addison-Wesley, 1995.

Jing Dong, Sheng Yang, Dushyant S. Lad, Yongtao Sun “Service Oriented Evolutions and Analyses of Design Patterns”[2009]

Kostas Kontogiannis ,Grace A. Lewis,Dennis B. Smith “The Landscape of Service-Oriented Systems: A Research Perspective for Maintenance and Reengineering”.

InfoWorld, “InfoWorld Research Report: Service Oriented Architecture (SOA)”, April 2007

Yang Peng , Lixin Ding “The Research and Implementation of Integration Framework of Enterprise Information System Base on Service-Oriented Architecture”( 2011)

Mira Kajko-Mattsson, Grace A. Lewis, Dennis B. Smith “A Framework for Roles for Development, Evolution and Maintenance of SOA-Based Systems”(2007)

Robert E. Raygan “Software Configuration Management Applied to Service Oriented Architecture” (2010)

K. Kontogiannis, G. Lewis, and D. Smith, “A Research Agenda for Service-Oriented Architecture: Research Needs for Maintenance and Evolution of Service-Oriented Systems”, Proceedings of the 2nd International Workshop on SOA-Based System Maintenance and Evolution (SOAM 2008), 12th European Conference on Software Maintenance and Reengineering (CSMR 2008), Athens, Greece, April 1-4, 2008.

H. Sneed, “Migrating to Web Services: A Research Framework”, Proceedings of the International Workshop on SOA Maintenance and Evolution (SOAM 2007), 11th European Conference on Software Maintenance and Reengineering (CSMR 2007), Amsterdam, the Netherlands, March 20-23, 2007.

Downloads

Published

2021-01-19

Issue

Section

Mechanical Engineering, Automotive, Mechatronics, Textile, Industrial and Manufacturing Engineering